VCT, LVT and concrete floor programs for Golden Valley commercial facilities. Written scope, fixed price.
Floor care programs for Golden Valley facilities are quoted the same way as all our services: walkthrough, written scope, fixed price. The program tier — scrub-and-recoat, burnishing or strip-and-wax — is determined by the floor condition at time of walkthrough, not by a default schedule.
One example from the Golden Valley market: a 15,000 sq ft office complex on the Highway 55 corridor with aging VCT in multiple states of finish.
The building has three distinct zones of VCT in different conditions — a recently stripped front lobby, a mid-building hallway with several years of scrub-and-recoat on top of the original strip, and a rear office wing where finish has thinned to the point that another scrub-and-recoat will not restore it. We scope each zone separately with the appropriate treatment level.
Older Highway 55 corridor buildings in Golden Valley often have VCT that has never been fully assessed — years of treatments stacked on top of each other. A condition assessment at walkthrough determines whether scrub-and-recoat or a full strip is the right starting point.
Scrub-and-recoat: Mechanical scrub removes the degraded finish layer, followed by one to two new finish coats. Appropriate for floors that have lost clarity but retain finish depth. Typically scheduled two to four times annually for Golden Valley office facilities.
Burnishing: High-speed friction restores gloss on floors that have been correctly stripped and finished within the prior 12 months. A maintenance step, not a restoration tool.
Strip-and-wax: Complete removal of existing finish followed by multiple new coats. The baseline reset — performed when scrub-and-recoat can no longer restore appearance. Typically every 12 to 24 months depending on traffic.
One call. We measure the space, write the scope, and send a fixed price within one business day.